3D Christmas Houses for Tea Lights
Assembly Guide & Details
Distinct Parts
5
Difficulty
Beginner
Print Time
1.5-2.5 hours each
Price
€2.99
📸 Photo Gallery
🔧 Assembly Instructions
What You'll Need
- All printed parts (ensure they're fully cooled)
- Optional: Fine sandpaper (220-400 grit)
- Optional: Primer and paint
General Assembly & Finishing Guidelines
- This model does not need assembly. You can print it in place without support. Sand any rough edges around windows.
🖨 Printing Tips
Recommended Settings
- Recommended filament color: White
- Layer Height: 0.12mm - 0.3mm (I printed with 0.3 with Matte filament)
- Infill: 10-15% for structural strength
- Supports: This model doesn't need supports
- Print Speed: 30-40mm/s for initial layer, then up to 150mm/s.
- Wall Count: 2-4 walls for strength
- Temperature: PLA 200-210°C, PETG 230-240°C
Material Recommendations
- PLA: but could be printed with other types (e.g. PETG)
- Colors: White
- Finish: Consider matte finish filament to reduce layer lines
🎨 Post-Processing & Painting
Special Effects & Details
- This model is hollow, I recommend gluing white baking paper on the inside, especially if you plan on adding lights. It will diffuse light for a warmer effect
- Add battery-powered tea lights (DON'T use fire)
🎄 Ready to Build Your Village?
Get this design and start printing your 3D Christmas Houses for Tea Lights today!
€2.99